Why settle for a one-size-fits-all solution? With Hamar Laser’s Build Your Own (BYO) program, you get exactly what you need, nothing more, nothing less.
Whether you are outfitting a basic X-660 system, building a powerful X-880 kit, or adding hardware to your X-770 PRO or X-990 PRO setup, we make it easy to configure the perfect laser shaft alignment solution for your workflow.
Choose your platform:
Entry-level, high-accuracy laser alignment at an unbeatable value
Feature-rich system with advanced measurement modes
The most powerful 3-Axis system available
Premium full-featured system for ultimate flexibility and performance
Your alignment needs may change. That is why X-Series™ is designed to be modular and expandable.
You can start with the basics
Add capabilities over time when you need them
Reuse existing brackets, lasers, targets, and software throughout the system’s lifecycle
No need to replace the whole system, just upgrade what you need.
Assumptions for this example: You have a 480 volt motor drawing 40 amps and operating 8400 hours/year. The Power Factor is .85. Electricity costs $0.06/kWhr. Also assume that the amp draw is measured before and after the alignment and it is found that there is a 1 amp difference.
kW =V* A*PF*1.732/1000
kW =480V* 1A*.85*1.732/1000
kW =.706 = power savings
Savings ($) = operating hours * kW savings * kW cost
Savings ($) = 8400 * .706 * $0.06/kWhr
Savings ($) = 8400 * .706 * $0.06/kWhr
Savings ($) = 355.82
If your plant has 80 similar motors, and if only half of them had the same amount of savings, it would total $355.82 * .5 = $14,232!
The coupling icons next to the data displays show the direction of the misalignment at the coupling and update as you move or shim the motor! You can also zoom in on the coupling to show them in the live display area of the screen.
