S-640 4-AXIS Coupling Alignment System [DISCONTINUED]

S-640 4-AXIS Coupling Alignment System [DISCONTINUED]

The S-640 Coupling Laser Alignment System has been designed for those with limited budgets but with high accuracy needs. It uses a single diode laser with the T-266 4-Axis Coupling Target and has been a workhorse for coupling alignment since it was introduced in 1992. It has newly designed brackets and computer interface that is 4 times smaller and is 5 times more accurate than the previous model. It also uses our new Windows-based Coupling4 software, featuring large, color graphics and color reports.

L-740 Laser

The L-740 laser is a low powered, single-beam visible-light Class II laser. It operates on a 9V rechargeable battery that lasts up to 8 hours on a single charge. The visible light requires no special viewing devices, allowing easy setup and rough alignment. It features an on/off switch that covers the optics when not in use.

T-266 Target

The T-266 is a 4-axis target that simultaneously displays horizontal and vertical center and angle readings. It also has an internal rotation sensor that automatically tells the software what clock position the laser is in. It produces accurate results with as little as 90 degrees of rotation. A metal shield protects the target optics when not in use.

R-358 Computer Interface

The R-358 computer interface, our newest generation of interfaces, provides high accuracy (.00002” or 0.0005 mm resolution) for downloading live target data into the Couple4 Software. It attaches to the computer with an RS-232 cable, is powered by a lithium ion battery for long life and usage, and automatically turns on when the target starts taking measurements. An AC adapter/charger is provided, and the unit features “charging” and “power” LED indicators.

A-907 Bracket Set

These aluminum and stainless steel dual-post mounting brackets feature quick-set speed nuts for nearly instant setup and can accommodate shaft diameters from 0.5? to 5? (12.7 mm to 127 mm) with standard chainless bracket, and shaft diameters from 5? to 12? (127 mm to 305 mm) the with chain attachment. With extra chain links it can accommodate up to 18? (457 mm) of shaft diameter. It has built-in magnets for shafts with large flanges, such as turbine rotor couplings.

  • Target provides 4-axis dynamic display of shims and moves.
  • Uses windows-based software with large, color graphics to display misalignment.
  • Target has a resolution of .00002? (0.0005 mm) for center and .00012?/ft (0.01 mm/M) for angle.
  • Uses quick-set brackets, for 0.5? to 12? (127 mm to 305 mm) diameter shafts, to mount to shafts.
  • System provides coupled or uncoupled shaft alignment capabilities.
  • System has vertical pump capability.
    Software has soft-foot routine.
  • Target rotation sensor automatically adjusts screen for clock position
  • Portable/rugged
  • Up to 30-foot (9.1 M) operational range between laser and target.
  • Reports can be generated in the field with optional PCMCIA Portable color printer.

L-740 Laser

:

Weight:

18 oz. (510 g)

Material Case:

Aluminum

Laser Type:

Visible Diode, Class II

Wavelength:

670 nanometers

Power:

<1mW

Power Supply:

Rechargeable battery pack (8 hour life)

Operating Distance:

20 feet (6 meters)

Size:

3.25 in. square x 2.0 in. (8.25×8.25x5cm)

T-266 Target

:

Type:

4-axis simultaneous

Resolution:

.00002 in. (.0005mm) center
.00012 in/ft (.01 mm/M) angular

Measuring Range:

± 5 degrees angular
± .150 in. (3.81mm) center

Size:

3.25 in. square x2.0 in. (8.25cmx8.25cmx5cm)

Cable Length:

10 feet (3.05 meters)

R-358 Computer Interface

:

Size:

3.33 in. W x 1.20 in. H x 5.25 in. D (84.6 mm x 304.5 mm x 133.4 mm)

Weight:

12 oz (249.5 grams)

Power:

3.5 V, 1350 mAh lithium ion rechargeable battery

Battery Life:

8 hours continuous operation

A-907 Bracket Set

:

Brackets:

0.5 in. width (12.7 mm) with magnetic attachments for coupling flanges, etc.

Shaft Range:

Standard bracket set: 3/8 in. diameter to 5 in. diameter (9.5 mm to 127 mm)
Link Chain Clamp Set: 5 in. diameter to 12 in. diameter (101.6 mm 304.8 mm).
Can accommodate shafts up to 18 in. diameter (475.2 mm) by adding additional chain.

Fixture Rods:

(4) 6 in. long (152.4 mm)
(4) 12 in. long (304.8 mm)

Chain Type:

#35 roller chain, 3.3 ft. long (1 m)

Products…

X-660 3-Axis BYO Laser

A complete shaft alignment laser featuring the advanced... read more

X-770 3-Axis Pro Laser

Offers the same hardware as the X-660 but with a Loaded...read more

X-880 5-Axis BYO Laser

X-880 – Includes the L-790 Unidirectional Dual-Beam™ Laser...read more

X-990 5-Axis BYO Laser

Offers the same hardware as the X-880 but with a Professional ...read more

Couple6 Software™

Innovative, Intuitive, Flexible, and Powerful...read more

CTA

Testimonials…

" I’m a field vibration analyst with CMS, a company that provides full-service PM support. The [X-990] is the best shaft alignment system I’ve ever used, and I’ve used it to align everything from extremely small pumps to large pumps for power plants. There’s a lot I like about Hamar’s [X-990]: You can leave the heads in one position and make the vertical and horizontal moves, a big time-saving feature. It’s extremely accurate, transmits alignment data wirelessly using Bluetooth and has a very intuitive, easy-to-use software package [Couple6]. It incorporates ambient lighting correction and has a sun filter for outdoor jobs, and it uses a PC tablet instead of a dedicated display. This tool makes us really shine as reliability pros. We’ve been very happy with Hamar Laser and the [X-990]!"
Justin Pope
Vibration Analyst Condition Monitoring Services, Nipomo, CA

More About X-Series™ Technology…

The X-Series™ range of shaft alignment products are the undisputable best accuracy shaft alignment system on the market today. read more...

Hamar Laser vs. Pruftechnik & Fixturlaser

Couple6 Easy Guide™…

In just 5-Steps Couple6™ software featuring Easy Guide™ navigation leads users to the fastest precision alignment available today. Learn more, and take the Couple6™ tour today.